How to Properly Use the Kinetico Water Softener Bypass Valve

Water Softeners are essential appliances in many households, as they help to remove Minerals such as calcium and magnesium from hard water. One important feature of a water softener is the bypass valve, which allows you to temporarily bypass the softening process when needed. The Kinetico water softener bypass valve is a key component of the system, and knowing how to properly use it can help you maintain your water softener and ensure it functions effectively.

The bypass valve on a Kinetico water softener is typically located on the back of the unit, near the inlet and outlet connections. It is a simple valve that can be turned to either allow water to flow through the softener or bypass it completely. When the valve is in the “service” position, water flows through the softener, allowing it to remove minerals and soften the water. When the valve is in the “bypass” position, water flows around the softener, allowing it to bypass the softening process altogether.

There are several reasons why you may need to use the bypass valve on your Kinetico water softener. For example, if you need to perform maintenance on the softener, such as replacing the resin beads or cleaning the brine tank, you will want to bypass the softener to prevent water from flowing through it during the maintenance process. Additionally, if you are experiencing a leak or other issue with the softener, bypassing it can help prevent further damage while you address the problem.

Model	Central tube	Drain	Brine tank connector	Base	Power supply parameters	Maximum power	Pressure parameters	Operating temperature\u00a0
5600	0.8125″/1.050″ O.D.	1/2″NPTF	1600-3/8″	2-1/2″-8NPSM	24v,110v,220v-50Hz,60Hz	3W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
5600SXT	0.8125″/1.050″ O.D.	1/2″NPTF	1600-3/8″	2-1/2″-8NPSM	24v,110v,220v-50Hz,60Hz	8.4W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
2510	1.05″ (1″)O.D.	1/2″O.D.	1600-3/8″	2-1/2″-8NPSM	24v,110v,220v-50Hz,60Hz	72W	2.1MPa	1\u2103-43\u2103
			1650-3/8″				0.14-0.84MPa
2700	1.05″ O.D.	3/4″NPTF	3/8″ & 1/2″	2-1/2″-8NPSM	24V,110V,220V-50Hz,60Hz	74W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
2850	1.9″(1.5″)O.D.	1″NPTM	3/8″&1/2″	4″-8UN	24v,110v,220v-50Hz,60Hz	72W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
2900	1.9″(1.5″)O.D.	3/4″NPTM	3/8″&1/2″	4″-8UN	24v,110v,220v-50Hz,60Hz	143W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
3150	2.375″(2″) O.D.	2″NPTF	1″NPTM	4″-8UN	24v,110v,220v-50Hz,60Hz	87W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
3900	3.5″(3″) O.D.	2″NPTF	1″NPTM	6″-8UN	24v,110v,220v-50Hz,60Hz	171W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
9000	1.05″ O.D.	1/2″NPT	1600-3/8″	2-1/2″-8NPSM	24v,110v,220v-50Hz,60Hz	8.9W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
9100	1.05″ O.D.	1/2″NPT	1600-3/8″	2-1/2″-8NPSM	24v,110v,220v-50Hz,60Hz	8.9W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa
9500	1.9″(1.5″) O.D.	1″NPTF	3/8″& 1/2″	4″-8UN	24v,110v,220v-50Hz,60Hz	8.9W	2.1MPa	1\u2103-43\u2103
							0.14-0.84MPa

To properly use the bypass valve on your Kinetico water softener, follow these steps:

1. Locate the bypass valve on the back of the unit. It is typically a lever or knob that can be turned to switch between the “service” and “bypass” positions.

2. To bypass the softener, turn the valve to the “bypass” position. This will allow water to flow around the softener, bypassing the softening process.

3. To return the softener to normal operation, turn the valve back to the “service” position. This will allow water to flow through the softener and be softened as usual.

It is important to note that when the bypass valve is in the “bypass” position, water will not be softened by the softener. This means that you may notice an increase in hardness in your water until you return the softener to normal operation. If you need to bypass the softener for an extended period of time, consider using a temporary water softening solution, such as a portable water softener or water softening Crystals, to maintain soft water in your home.

In conclusion, the bypass valve on your Kinetico water softener is a valuable tool that allows you to temporarily bypass the softening process when needed. By following the steps outlined above, you can properly use the bypass valve to maintain your water softener and ensure it functions effectively. Remember to always return the softener to normal operation after bypassing it to ensure that your water remains soft and free of minerals.